Epson SC-F9300 series User Manual page 11

SC-F9300 Series User's Guide
B
Roll holder
Place media on these holders. There are same parts on both the left and the right.
C
Level gauge
When installing on a carpeted floor or a sloping floor, check the horizontal level of the printer. There are same
parts on both the left and the right.
U Setup Guide
D
Roll support
Rest media on these supports before placing it on the roll holders. There are same parts on both the left and the
right.
E
Lift lever
If the media to be mounted on the roll holders seems heavy, use these levers to raise the media easily to the
level of the roll holders. They are on both the left and right sides.
F
Handle
After placing media on the right roll holder, rotate the handle to press the holder and apply pressure to the roll
core.
Introduction
11