Epson SC-F9300 series User Manual page 32

SC-F9300 Series User's Guide
S
T
Tap lightly on both ends of the media, and
check if there is a difference in tension between
the left and right sides.
If there is a difference in tension, the media
becomes loose.
From the front of the printer, raise the media
loading lever, and correct the looseness in the
media.
Once the looseness is corrected, lower the
media loading lever.
Basic Operations
U
While holding the tabs of the media edge plate
on both sides, move the plate to the top edge of
the media.
Adjust so that the edges of the media are
aligned with the center of the round holes in
the media edge plates.
The media edge plates prevent the media from
riding up and keep fibers on the cut edge of the
media from touching the print head.
32