Epson SC-F9300 series User Manual page 100

SC-F9300 Series User's Guide
Item
Margin Setting
Side Margin(Right)
Side Margin(Left)
Print Start Position
Margin Between Pages
*
Standard
No Margin
Skip Wrinkled Media
Media Check
Using the Control Panel Menu
Parameter Explanation
* Choose the width of the right margin when media is loaded in the
3 to 25 mm (5 )
printer. See the following for more information.
U
*
Choose the width of the left margin when media is loaded in the
3 to 25 mm (5 )
printer. See the following for more information.
U
* Adjust this parameter if you want to print from the near center of the
0 to 800 mm (0 )
media or if you want to shift the printed area left from the Side
Margin(Right) setting. The area between the right edge of the media
and Print Start Position is left blank. If a value is selected for Side
Margin(Right), an additional area corresponding to the width selected
for Side Margin(Right) will be left blank. See the following for more
information.
U
- You can adjust a margin between pages. Even after making
adjustments, the size of the margin may change, depending on the
media and usage environment.
-10 mm to +10 mm
The margin increases when the number is moved in the + direction, and
decreases when the number is moved in the - direction.
U
On Off is recommended in normal circumstances.
If the print head is scuffed because of wrinkles that occur from media
*
Off
being left on the heater, set this to On.
Turn this On to feed media 200 mm and print to avoid wrinkles when
printing with non-continuous jobs. In the following situations, the
media is not fed, even if this is turned On.
❏
❏
"Printable area" on page 52
"Printable area" on page 52
"Printable area" on page 52
"Printable area" on page 52
When printing with continuous jobs.
When Margin Between Pages is set to No Margin.
100