Upper & Lower Quantity Limit Checking - Jadever JCL-3K Manual

1) Long press key
The number leftmost is blinking.
2) /MR
Press key
to modify the value (or via numeric keys)
G N/SET
3) Press key
M+/SAVE
4) Press key
mode without saving.
Place the sample on the weighing pan.
HI indication appears, when the item on the weighing pan is greater than the upper limit
OK indication appears, when the item on the weighing pan is between upper and lower limits.
LO indication appears, when the item on the weighing pan is smaller than lower limit
Note: the item on the weighing pan should be more than or equal to 20e.
When changing the Hi-Lo value, the scale will activate the weighing checking function
automatically. If the Lo value is higher than Hi value, then the Hi value will become the
same value as Lo data.
7-3-2 Upper & Lower Quantity Limit Checking
Upper Quantity Limit
1） Long press key
The number leftmost is blinking.
/MR
2）Press key
to modify the value (or via numeric keys)
G N/SET
3）Press key
M+/SAVE
4）Press key
mode without saving.
Lower Quantity Limit
1) Long press key
The number leftmost is blinking.
2) /MR
Press key
to modify the value (or via numeric keys)
G N/SET
3) Press key
M-/HI
under the weighing mode.
TARE/
or to shift and key
to start or close weighing checking
to confirm and save. Press key
M-/HI
under the weighing mode.
TARE/
or to shift and key
to start or close weighing checking
to confirm and save. Press key
M-/HI
under the weighing mode.
TARE/
or to shift and key
to start or close weighing checking
(II)
M-/HI PRINT/LO
or
ZERO/ESC
M-/HI PRINT/LO
or
ZERO/ESC
M-/HI PRINT/LO
or
to return to weighing
to return to weighing
11