Table of Contents
Advertisement
User Manual of HD-TVI Speed Dome
3.4.3 Configuring Patrols
Purpose:
A patrol is a scanning track specified by a group of user-defined presets. You can call a patrol to scan
the scenes automatically among the user-defined presets in sequence.
Steps:
1. Move the cursor to enter patrol configuration submenu:
MAIN MENU > DOME SETTINGS > PATROLS
2. Choose the patrol number.
Steps:
(1) Move the cursor to PATROL NO. and click IRIS+ to enter edit mode.
(2) Click the up and down direction buttons to select the number of the patrol which is to be
configured.
(3) Click IRIS+ again to confirm the settings and exit edit mode of this column.
Up to 10 patrols can be configured.
3. Edit the patrol.
Steps:
(1) Move the cursor to EDIT PATROL and click IRIS+ to enter edit mode.
PATROLS
PATROL NO.
EDIT PATROL
PREVIEW
CLEAR PATROL
PATROL_D
BACK
Figure 3-13 Patrol Configuration Menu
NUM PST
DWELL
1
0
2
0
3
0
4
0
5
0
6
0
7
0
IRIS+ OK
IRIS- CANCEL
Figure 3-14 Edit the Patrol
1
30S
EXIT
SPEED
6
30
6
30
6
30
6
30
6
30
6
30
6
30
30
Advertisement
Table of Contents
