Telair 5400H Manual For Installation And User Manual page 10

Working from inside the vehicle, shift the air
conditioner until the four fixing threads are
aligned with the square 395 x 395 mm
opening of the hole on the roof.
Ensure that the cylindrical seal at the bottom
of the air conditioner is again correctly
installed in its seat.
Line the four external sides of the connecting
duct with adhesive insulating tape so that it
adheres to the folded fixing edge (fig. 8).
Working from inside the camper, insert the
connection outlet at the base of the air
conditioner; use the four supplied 12 mm long
self-tapping screws to fix it. Align with the
rectangular hole of the fan (Fig. 9). The arrow
in figure 9 indicates the vehicle driving
direction.
By using the 4 supplied M6 screws, fix the
air/block tunnel to the bottom of the air
conditioner, locking it to the roof of the
camper (Fig. 10).
The screws must be tightened to a torque of
2 N m, i.e. 0.2 Kgm. It is advisable to use a
torque wrench.
Incorrect tightening can damage
the support base of the air conditioner,
compromise the seal and cause loud
noise inside
conditioner is in operation.
10
the vehicle when the