Table of Contents
Advertisement
•
Avoid
frequent
windows unless necessary.
•
Select a suitable temperature and airflow
rate.
•
Adjust the outflow vents to maximise
comfort.
•
Never close both adjustable vents when
the conditioner is running.
•
Clean the diffuser filters periodically.
•
Do not obstruct airflow inlets/outlets with
fabric, paper or anything else.
•
Do not spray water inside the air
conditioner.
•
Remove the remote control battery if you
do not intend to use the conditioner for a
long period.
•
Periodically check that the condensate
drain holes are not obstructed.
•
Periodically check that external intakes
grilles are clean so as to maintain
maximum air conditioner efficiency.
•
Clean the air conditioner with detergent
solutions only; never use petrol or
solvents.
•
If the vehicle is garaged for the winter
disconnect the air conditioner from the
power socket.
5.4
Installing batteries in the Remote
Control
1. Remove the cover
by sliding it in the
direction indicated
by the arrow.
2. Insert two new
LR03 size AAA
1.5 V batteries,
according to the
polarity indicated
3. Replace the cover.
opening/closing
of
5.5
Information on Remote Control use
•
Point the remote control towards the
internal unit of the conditioner.
•
There must be no obstructions between
the remote control and the internal unit.
•
Do not drop or throw the remote control.
•
Do not expose the remote control to direct
sunlight or leave it near heating systems
or other sources of heat.
•
If you do not intend to use the remote
control for some time, remove the
batteries.
•
When the control reception sound signal
is no longer audible in the indoor unit, or
when the transmission symbol on the
display screen is no longer clearly visible,
the batteries need replacing.
•
If the remote control unit resets when a
key is pressed, battery power is too low:
the batteries need replacing.
5.6
Remote
functions
1 - Secondary keys access flap
2 - Display (see Fig. 19)
3 - On/Off control to start/stop the air
conditioner.
4 - +TEMP and -TEMP to set the required
temperature between 16 and 31 °C.
5 - LIGHT key (not used)
6 - FAN enables to select one of three
available speed settings, or it can be left to
the conditioner to select the most suitable
setting.
7 - MODE enables to select the Automatic,
Cold or Hot operation mode.
8 - TIMER enables to activate the timer
function and set the air conditioner start and
stop times
9 - +HOUR and –HOUR to set the remote
control time and timer function start and stop
times.
10 - SET to access the remote control time
adjustment mode or validate the timer
function start and stop times.
11 - CLEAR deletes the timer function
programming.
12 - RESET to control a remote control total
reset (hidden button to press with a small
sharp object).
13
control
key
definitions/
Hide quick links:
Advertisement
Table of Contents
