HP MSR Series Configuration Manual page 146

[DeviceB] nqa server enable
# Configure a listening service to listen on IP address 10.2.2.2 and UDP port 9000.
[DeviceB] nqa server udp-echo 10.2.2.2 9000
4. Configure Device A:
# Create a voice operation.
<DeviceA> system-view
[DeviceA] nqa entry admin test1
[DeviceA-nqa-admin-test1] type voice
# Configure 10.2.2.2 as the destination IP address and port 9000 as the destination port.
[DeviceA-nqa-admin-test1-voice] destination ip 10.2.2.2
[DeviceA-nqa-admin-test1-voice] destination port 9000
[DeviceA-nqa-admin-test1-voice] quit
# Start the voice operation.
[DeviceA] nqa schedule admin test1 start-time now lifetime forever
# Stop the voice operation after a period of time.
[DeviceA] undo nqa schedule admin test1
# Display the results of the voice operation.
[DeviceA] display nqa result admin test1
NQA entry (admin admin, tag test1) test results:
Destination IP address: 10.2.2.2
Send operation times: 1000
Min/Max/Average round trip time: 31/1328/33
Square-Sum of round trip time: 2844813
Last succeeded probe time: 2008-06-13 09:49:31.1
Extended results:
Packet loss in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
Voice results:
RTT number: 1000
Min positive SD: 1
Max positive SD: 204
Positive SD number: 257
Positive SD sum: 759
Positive SD average: 2
Positive SD square sum: 54127
Min negative SD: 1
Max negative SD: 203
Negative SD number: 255
Negative SD sum: 759
Negative SD average: 2
Negative SD square sum: 53655
Receive response times: 1000
Min positive DS: 1
Max positive DS: 1297
Positive DS number: 259
Positive DS sum: 1797
Positive DS average: 6
Positive DS square sum: 1691967
Min negative DS: 1
Max negative DS: 1297
Negative DS number: 259
Negative DS sum: 1796
Negative DS average: 6
Negative DS square sum: 1691776
137