Advertisement
( 2 ) Preprogram functions
• The unit can be linked together as master/slave in 4 or 8 channels and run by
built in preprogrammed chase sequences automatically or by sound activation.
Please refer to dip switch setting table for how to set the dip switches to achieve
master/slave linking.
• The first unit dip switch 10 must be on in master/slave mode
Unit
Dip switches setting
Master
Slave 1
Slave 2
Slave 3
( 3 ) By easy controller
The easy remote control is used only in master/slave mode. By connecting
to the 1/4" microphone jack of the first unit, you will find that the remote control
on the first unit will control all the other units for Stand by, Strobe/Next and
Fast/Slow function.
1. STAND BY : blackout and switch off the bulb.
2. STROBE/NEXT : when the unit is in fast mode press the
button and keep pressed up, it will strobe by sound activation.
If the unit is in slow mode, you can select the next color and
next sequences.
:
3. FAST/SLOW
when the led light off, it is in FAST mode. The
unit change color by sound activation. If the led light on, it is
in SLOW mode, you can select the next color by NEXT
button.
B. MAIN FEATURES
•
Voltage：AC 110~120V 60Hz or AC 230/240/250V 50/60Hz
• Bulb：JCR 15V 150W
• The unit is a DMX512 compatible color changer. It features full DMX512 control,
10 dichroic colors plus clear and shutter, accurate focus able optics system and
stepper motor with blackout and switch off the bulb feature. Fan cooled.
• T hermal switch for overheat protection.
• It can be operated by DMX512 control or can be used as an individual unit
without a control.
• It can be linked together in master/slave combination units, as many as required
in 4 or 8 channels and run by built-in preprogrammed chase sequences
automatically or by sound activation through an internal microphone to create an
intelligent effect.
• Please use a 3 pin XLR cable/plug when connecting them together.
4B
• It features different preprogrammed chase patterns.
• Dimensions：265 x 140 x 160 mm
• Weight：5.0 kg
C. LAMP
JCR 15V 150W
• Always switch off the mains supply and never handle the lamp or luminaire when
it is hot.
• Do not touch the bulb with bare hands. If this does happen, clean the lamp with
denatured alcohol and wipe with a lint free cloth before installing.
Advertisement
