Automatic Measurement; Application Example - UNI-T UTD2025C Operating Manual

Operating Manual for UTD2000/3000

Automatic measurement

As shown in following figure, MEASURE is
automatic measurement function key. You can be
familiar with powerful automatic measurement
function of UTD2000/3000 series digital storage
oscillograph gradually by following introduction.
Figure 2-28 Function key (automatic measurement)
of sampling system

Application example

Measurement menu of such series of oscillograph
can be used to measure 28 kinds of waveform
parameters. User can press MEASURE key Enter
into parameter measurement display menu firstly.
The menu includes 5 areas to display measurement
value at the same time. They correspond to function
keys of F1 to F5 respectively. Please press
corresponding F keys Enter into measurement
category selection menu if measurement category
shall be selected for any area. Measurement
category selection menu can be classified into
voltage and time kinds Enter into voltage or time
measurement category respectively. Please press
F1 to F5 to select measurement category then
return to parameter
measurement display menu. In addition,user can
60