Appendix C: Maintenance And Cleaning Maintenance - UNI-T UTD2025C Operating Manual

Appendix C: Maintenance and cleaning
General maintenance
It is not allowed to store or place instruments in
locations with direct sunshine for LCD for a long
time. Note: It is not allowed to touch instrument or
probe by pressurized spray, liquid or solvent to
avoid damage.
Cleaning:
Instrument and probe can be inspected constantly
according to operation.
Please clean outer surface of instruments
according to following steps:
1. Please remove floating dust out of instrument
and probe by soft cloth. Please do not scratch
transparent LCD protection screen during cleaning.
2. Please power off when cleaning the instrument
by wet soft cloth without dripping. It can be cleaned
by soft detergent or clean water. It is not allowed to
use any corrosive chemical detergent to avoid
105
Operating Manual for UTD2000/3000
damage to instrument or probe.
Warning: Please confirm that instrument has been
dried thoroughly before power re-supply to avoid
electric short-circuit even personal injury due to
moisture.