Waveform Storage - UNI-T UTD2025C Operating Manual

Operating Manual for UTD2000/3000
2. Waveform storage function: saving.
UTD2000 series of oscillograph can provide waveform
storage function. User can press[STORAGE]key and
[F1] key to select storage type of "waveform". User can
press [F2]key to select channel to save waveform then
press[F5]Enter into next page. Magnetic disk in F1
menu position can designate storage position and
default storage position is digital storage oscillograph
(DSO) without plugging in U-disk. Stored magnetic disk
position can be [DSO] or [USB] after plugging in U-disk.
Figure 3-11 Waveform storage
Default storage depth shown by F2 is ordinary and
saved waveform only can be displayed by oscillograph.
Storage depth can be selected to long storage to save
".data" for exportation by waveform analysis software
when plugging in U-disk and selecting magnetic disk
position to [USB]. It is allowed to analyze content data
of every point of saved waveform. User can also press
F5 Return to previous menu then select storage
position by multi-function button then press [F3] for
Figure 3-12 Waveform storage by U-disk
86