Chapter 5: Technical Indicators; Appendix A: Technical Indicators - UNI-T UTD2025C Operating Manual

Chapter 5: Appendix

Appendix A: Technical Indicators

Unless otherwise specified, all technical dimensions are appropriate to probes by setting attenuation
switch to 10* and UTD2000/3000 series digital storage oscillograph. Digital storage oscillograph must
meet 2 conditions as follows to meet such dimension standards:
Instrument must operate under regulated operation temperature for more than
continuously
Be sure to open system function menu and execute
operating temperature reaches or exceeds
with "typical" pattern.
91
Operating Manual for UTD2000/3000
self-correction procedure if variation scope of
. All dimensions shall be guaranteed except dimension
minutes