Introduction To System Prompt; Screen Copy; Chapter 4: System Prompt And Troubleshooting; System Prompt Information - UNI-T UTD2025C Operating Manual

Operating Manual for UTD2000/3000
4. PrtSc copy & storage function
There is 1 PrtSc key in upper left corner of the screen
for UTD2000L/2000EX series of oscillograph. User
can press the key for screen copy after plugging in U-
disk. Displayed image can be saved in U-disk by way
of ".BMP" format.
Figure 3-15 Screen copy
Chapter 4: System Prompt and
Troubleshooting

Introduction to System Prompt

Regulation to the extreme: It prompts that multi-
purpose knob has been regulated to the greatest
extent under current status and continued adjustment
is not allowed. The prompt will display when
regulating vertical deflection coefficient switch, time
base switch, X displacement, vertical displacement
and trigger level to the terminal.
Successful connection of U-disk: The prompt will
display on the screen after connecting U-disk to
digital storage oscillograph and correct connection.
Plug-out of U-disk: The prompt will display on the
screen when plugging out U-disk from digital
storage oscillograph.Saving: The prompt will
display on the screen with schedule bar below it
when saving waveform
88