Template Setup - UNI-T UTD2025C Operating Manual

Form 2-24 Template setup
Function menu Setup
Template output
1-200Pixel Set horizontal tolerance
Horizontal
Vertical
1-100Pixel Setvertical tolerance scope
Return
Key note:Key note:
Self-correction: Self-correction procedure is to
correct measurement error caused by digital
storage oscillograph due to ambient variation. You
can operate the procedure according to demand.
Please open power of digital storage oscillograph
then wait for instrument pre-heating for 30 minutes
for more correct calibration. Please press UTILITY
key (as an auxiliary function) for operation
59
Description
Set horizontal and vertical
Pass/Fail tolerance scope
according to adjustment
scope
Return to Pass detection
menu
Operating Manual for UTD2000/3000
according to prompt shown in the screen.
Language selection: There are many kinds of
languages for UTD2000/3000 series digital storage
oscillograph. Please press UTILITY menu button
and select appropriate language.