Display Menu - UNI-T UTD2025C Operating Manual

Form 2-15 Display menu
Function menu
Display type
Format
Continuous
Waveform brightness
Key points:
Display type: To fill in blank between adjacent sampling points during vector display. Only sampling points
will be displayed for point display.
49
Setup
Vector point Only to display sampling points by wiring.
YT Operation mode of digital storage oscillograph
XY
X-Y display mode; X input for CH1 and Y input for CH2;
Real-time updating of screen waveform;
Close
To update after keeping waveform data shown in the screen for 1s;
1s
To update after keeping waveform data shown in the screen for 2s;
2s
To update after keeping waveform data shown in the screen for 5s;
5s
To always keep display of original waveform data shown in the screen
Infinite
until this function is inactivated if new data is added into display
continuously;
To set waveform brightness (without this function for
1% - 100%
UTD2000C/3000C)
Operating Manual for UTD2000/3000
Descriptions