Trigger Of Video Row; Trigger Of Video Field - UNI-T UTD2025C Operating Manual

Operating Manual for UTD2000/3000
5. To press [F4] key as menu operation key to select
synchronization of odd field or even field.
6. To adjust horizontal time base by rotating
horizontal SCALE knob in horizontal control area so
as to gain clear waveform display.
Figure 3-8 Trigger of video field

Trigger of video row

Please operate according to following steps for
trigger in video row:
1. To press [MENU] button in trigger control area to
display trigger area.
2. To press[ F1] key as menu operation key to select
video.
3. To press [F2] key as menu operation key to set
trigger source to Ch1.
4. To press[F3] key as menu operation key to select
video standard of PAL.
5. To press[ F4] key as menu operation key to select
synchronization to designated row.
6. To rotate multi-purpose knob controller for trigger
in any row.
7. To adjust horizontal time base by rotating
horizontal SCALE knob in horizontal control area so
as to gain clear waveform display.
82