General Information
Loading a Plastic Card
a
Close the Top Cover if it is open.
b
Adjust the Card Slot Guide (1) located at the back of the machine to fit the width of the plastic card.
c
Insert the plastic card into the Card Slot (1). The card will be fed into the machine.
NOTE
• If the plastic card is embossed, insert the plastic card, the embossed side down, into the Card Slot.
• If the plastic card is not fed into the machine, pull the plastic card out from the machine and then load it on
the ADF (see Loading Business Cards on page 35).
1
1
1
1
39