Ff - Form Feed - Ithaca Epic 950 Integration Manual

Table of Contents

Command Reference

FF – Form Feed

Description

This command prints the contents of the text buffer, and then advances the print media.

The form is advanced until either of the following two conditions occurs:

•

The feed distance specified by the GS L command has been reached.

•

A Black Dot/Top of Form indicator has been detected on the print media.

When the printer is initially powered on, the default feed distance stored

in NVRAM is used. This value has a factory default of 7.5 inches, and

can be overridden by specifying a new value using the GS L macro

command.

Feed distances specified via GS L are cleared whenever the printer is powered down, or

by issuing the ESC @ or ESC * reset commands.

This command shares identical functionality with the escape command ESC E.