Programming for the Epic 950
Epic 950 OEM Integration Manual
DIP Switch Settings
The majority of these dip switch operations are defined in the POR.INI file, as
documented in the previous pages.
Switch 1
Disabled
Switch 8
Active
Outside Edge of printer
Switch 1 is the furthest to the back. The Active position is toward the outside edge of the
printer.
Switch 1
Switch 1 is reserved and must be in the Disabled position. If activated, the printer will be
held in reset.
Switch 2
Switch 2 configures Ticket Low. The Disabled position prevents ticket low from being
detected.
Switch 3
Switch 3 activates Demo mode. It must be in the Disabled position for normal operation.
Switch 4
Switch 4 activates the Error log. This is useful for debugging but should not be on by
default.
Switch 5
Switch 5 activates Com Save. This is also a debugging feat ure, and will be used with
future TransAct tools to help debug printer operations.
Switch 6
Switch 6 is reserved
Switch 7
Switch 7 activates the Smart Suite features. This activates a mode of operation that is
an enhancement of Series 800 emulation. It should not be activated when replacing a
Series 800 printer. To see what features are available in the Smart Suite
enhancements, refer to the Epic 950 Smart Suite Supplement. To activate the progress
status features in the Demo program, you must turn this feature on.
Switch 8
Page 68
95-05245
Rev G