Table of Contents
Advertisement
Command Reference
ESC E – Form Feed
This command prints the cont ents of the text buffer, and then advances the print media.
The form is advanced until either of the following two conditions occurs:
•
The feed distance specified by the GS L command has been reached
•
A Black Dot/Top of Form indicator has been detected on the print media
When the printer is initially powered on, the default feed distance stored
in NVRAM is used. This value has a factory default of 7.5 inches, and
can be overridden by specifying a new value using the GS L macro
command.
Feed distances specified via GS L are cleared whenever the printer is powered down, or
by issuing the ESC @ or ESC * reset commands.
This command shares identical functionality with the FF command.
See also:
FF – Form Feed
Expression
ASCII
[ESC] E
Hexadecimal
1BH 45H
Decimal
<27> <69>
Parameters
None
95-05245
Epic 950 OEM Integration Manual
-or-
Rev G
Page 93
Advertisement
Table of Contents
