Table of Contents
Advertisement
Command Reference
ESC BEL – Configure Audio Alert
Description
The ESC BEL command alters the way the audio alert sounds when the BEL command
is issued. The default is a single sound lasting the period of time defined by the audio
alert setting parameters below.
See also:
BEL – Audio Alert
Expression
ASCII
[ESC] [BEL] <n1> <n2> <n3>
Hexadecimal
1BH 07H <n1> <n2> <n3>
Decimal
<27> <7> <n1> <n2> <n3>
Parameters
<n1> is the number of alert cycles
<n2> is the on time of the alert cycle in ten Ms intervals
<n3> is the off time of the alert cycle in ten Ms intervals
Page 86
Epic 950 OEM Integration Manual
Rev G
95-05245
Advertisement
Table of Contents
