Esc $ - Set Absolute Horizontal Position In - Ithaca Epic 950 Integration Manual

Command Reference
ESC $ – Set Absolute Horizontal Position in page mode
Description
Sets the horizontal print position measured from the left edge of the page, for the
currently selected print direction. Distance is specified in dots, where 1 dot = 1/203 inch.
The n1 and n2 parameters are evaluated to form a 16-bit word as follows: first, the n1
parameter's decimal value is multiplied by 256, then the result is added to the decimal
value of the n2 parameter.
Expression
ASCII [ESC] $ <n1><n2>
Hexadecimal 1BH 24H <n1><n2>
Decimal <27> <36> <n1><n2>
Parameters n1 = most significant byte of start position
n2 = least significant byte of start position
95-05245
Epic 950 OEM Integration Manual
Rev G
Page 89