Appendix A: Character Codes - Ithaca Epic 950 Integration Manual

Appendix A: Character Codes

Appendix A: Character Codes
This appendix contains a list showing the ASCII characters supported by the Epic 950 printer,
including a table of supported non-printable control characters, and a chart featuring supported
printable characters and their hexadecimal ASCII equivalents. These character values may be up
to two bytes in length.
Note that you can also select an alternate code page- mapping scheme by editing the
CodePageMap.ini file that is stored in your printer. This is performed by using the download utility
(supplied by TransAct ) to copy this file from the printer to your PC, and then editing this file as a
text file to make the character mapping parameter changes under the [Charmap] section, using
the following syntax:
CHx24 = 0x00A5 ;dollar to yen re-mapping
EXAMPLE CodePageMap.ini:
;This file sets the character code page mapping to a Unicode font
;This file is included in the firmware check sum
;Code page is [8859-1 W EU Latin-1]
;CodePage index = unicode mapping
;CHx41 = 0x0041 # LATIN CAPITAL LETTER A
;only need to include chars that are different than ISO 8859-1
[Charmap]
CHx24 = 0x00A5 ;dollar to yen re-mapping
The following pages contain the list of default character codes.
95-05245
Epic 950 OEM Integration Manual
Rev G
Page 141