Epic 950 Specifications and Requirements
Epic 950 OEM Integration Manual
Ticket Stack Orientation
To ensure the ticket is loaded correctly into the printer, the ticket stack must be properly
loaded in the ticket box. The stack must be oriented so that the Black Dot/Top of Form
mark of the tickets is on the leading edge of the ticket, not near the perforation of the
next ticket. If the top ticket on the stack has the back facing upward, the perforation
attaching the next ticket will be toward the front of the Ticket Tray with the Black Dot/Top
of Form indicator in the rear right corner. If the print area is facing upward, the
perforation attaching the next ticket will be toward the rear of the Ticket Tray. For
instructions on inserting the first ticket into the printer, see the section "Loading Tickets
into Feeding Mechanism".
Figure 7. Ticket Stack Orientation
Page 18
95-05245
Rev G