YASKAWA DX200 Instructions Manual page 31

165626-1CD
JARCR-XFB01B Board
for DeviceNet
5 Allocating I/O Signals
5.1 I/O Module Setting
13. Select {DETAIL} of {EXTERNAL IO ALLOCATION}.
– When select {AUTO}, the following procedures No.14 to 16 are not
necessary. Operate the procedure from No.17.
– When select {MANUAL], operate the following procedures No.14 to
16 accordant with the setting manually.
14. Select the external I/O signal number (at the change source) to be
changed. (In the setting example, select "#20060".)
– The select menu appears.
5-8
HW1481973
31/70