YASKAWA DX200 Instructions Manual page 30

JARCR-XFB01B Board
for DeviceNet
5 Allocating I/O Signals
5.1 I/O Module Setting
11. Select {AUTO} or {MANUAL} in the ALLOCATION MODE.
– The selection menu appears after selecting {AUTO} or {MANUAL}.
If the allocation mode is changed from {MANUAL} to
{AUTO}, the set allocation data is discarded. The data will
NOTE
be allocated by AUTO MODE again. Save the set
allocation data to the external devices in advance, if
needed.
12. Select the allocation mode to set up.
– Select {AUTO} to allocate I/O signal allocation automatically.
Select {MANUAL} to allocate I/O signal allocation manually.
– The selected allocation mode is set up.
5-7
165626-1CD
HW1481973
30/70