Environmental Requirements - Brocade Communications Systems ICX 7250 Hardware Installation Manual

Model
ICX 7250-48P

Environmental requirements

Condition
Ambient temperature
Relative humidity (non-
condensing)
Altitude (above sea level)
Shock
Vibration
Airflow
Heat dissipation
Operating noise
Power supply specifications (per PSU)
The EPS4000 and its power supply modules (RPS17) are field-replaceable. All other Brocade ICX 7250 power supply units (PSUs) are
fixed and internal to the devices. All the PSUs use a C14 inlet and connect to standard AC power.
NOTE
The EPS4000 must have at least one RPS17 installed to provide power to the supported Brocade ICX 7250 devices.
Device Maximum output
power rating (DC)
ICX 7250-24G 65 W
ICX 7250-24
ICX 7250-24P 525 W
Brocade ICX 7250 Switch Hardware Installation Guide
53-1003898-02
Height
1.72 in
4.37 cm
1.72 in
Operational
-5°C to 50°C (23°F to 122°F)
5% to 95% at 50°C (122°F)
0 to 3,000 m (10,000 feet)
20 G, 11 ms, half-sine wave
1 G sine, 0.4 gms random, 5-500 Hz
ICX 7250-24G: 14.3 CFM (Maximum), 5.7 CFM (Typical)
ICX 7250-24 : 14.0 CFM (Maximum), 5.7 CFM (Typical)
ICX 7250-24P: 34.4 CFM (Maximum), 13.7 CFM (Typical)
ICX 7250-48: 34.8 CFM (Maximum), 13.8 CFM (Typical)
ICX 7250-48P: 45.2 CFM (Maximum), 21.4 CFM (Typical)
Refer to Power Consumption specification sections
ICX 7250-24G: 40 dBA
ICX 7250-24: 41.9 dBA
ICX 7250-24P: 44.7 dBA
ICX 7250-48: 44.5 dBA
ICX 7250-48P: 45.9 dBA
Input voltage
100 - 240 VAC
(nominal)
90 - 264 VAC
(range)
100 - 240 VAC
(nominal)
90 - 264 VAC
Width
17.32 in
44.0 cm
17.32 in
Input line Maximum input
frequency current
50/60 Hz 1.5 A (rms)
(nominal)
47 - 63 Hz
(range)
50/60 Hz 6 A (rms)
(nominal)
47 - 63 Hz
Brocade ICX 7250 Switch Technical Specifications
Depth
14.6 in
37 cm
14.6 in
Non-operational
-25°C to 70°C (-13°F to 158°F)
5% to 95% at 70°C (158°F)
0 to 12,000 m (39,000 feet)
33 G, 11 ms, half-sine wave
2.4 G sine, 1.1 gms random, 5-500 Hz
N/A
N/A
N/A
Input line
protection
Line fused
Line fused
Weight
10.6 lb
5.9 kg
13.0 lb
Maximum inrush
current
40 A at 115 VAC
80 A at 230 VAC
Cold start @ 25°C
30 A at 115 VAC
60 A at 230 VAC
Cold start @ 25°C
103