Upgrading Firmware And Identifying Current Firmware Version - Triplett CamView IP Pro User Manual

34 CamView IP Pro, Pro-C, and Pro+ User Manual

4.7.3 Upgrading Firmware and Identifying Current Firmware Version

IP and Analog camera standards are constantly evolving, therefore it is important that you keep
your Tester up-to-date with the most recent firmware. Follow these steps to update the firmware:
STEP 1: Power Up the Tester
Press the Power Button on the side of your CamView IP Pro, Pro-C, or Pro+ Tester to turn it on if
it is not already powered on.
STEP 2: Connect to the Internet
Plug an ethernet cable into Network Port 2, and plug the other end of the ethernet cable into a
network that has Internet access. Wait for the light on the LINK/ACT on Network Port 2 to flash
before moving on to the next step. (If the network you are plugging into is using DHCP, the Tester
will automatically detect the IP Settings. Otherwise, you will need to manually apply the IP settings.
Consult your Network Administrator if you need assistance.)
STEP 3: Select the Settings Screen
On the Main Menu, highlight "Settings" using the Down Arrow Key. Once the "Settings" option is
highlighted, press the Right Arrow Key to access the Device Settings screen.
STEP 4: Select the System Upgrade function
While on the Device Settings screen, scroll down to the System Upgrade option using the Up or
Down Arrow Keys, then press the Right Arrow Key to access the Check Upgrade screen. Your
current firmware version will show on this screen.