6.
Lift the hard drive carrier straight up and out of the chassis.
Figure 6-23
7.
Remove the four guide screws from the sides of the hard drive carrier.
Figure 6-24
8.
Lift the hard drive up to the top of the carrier (1) and slide the drive out of the carrier (2).
Figure 6-25
52
Chapter 6 Removal and Replacement Procedures
Removing the Hard Drive Carrier
Removing the Guide Screws
Removing the Hard Drive from the Carrier
Need help?
Do you have a question about the Compaq 6005 Pro and is the answer not in the manual?
Questions and answers