Recovering The Configuration Settings - HP Compaq 6005 Pro Maintenance And Service Manual

Table 3-6 Computer Setup—Advanced (for advanced users) (continued)
Option

Recovering the Configuration Settings

This method of recovery requires that you first perform the Save to Removable Media command
with the Computer Setup (F10) Utility before Restore is needed. (See
on page 9
NOTE: It is recommended that you save any modified computer configuration settings to a a USB
flash media device or a diskette-like device (a storage device set to emulate a diskette drive) and
save the device for possible future use.
To restore the configuration, insert the USB flash media device or other storage media emulating a
diskette with the saved configuration and perform the Restore from Removable Media command
with the Computer Setup (F10) Utility. (See
Computer Setup—File table.)
20 Chapter 3 Computer Setup (F10) Utility
Description
controller from being used by the operating system and reduces the power used by the
computer in S5.
●
Processor cache (enable/disable).
● Multi-Processor (enable/disable). This option may be used to disable multi-processor support
under the OS.
●
Integrated Graphics Memory Size (Automatic, 32M, 64M, 128M, 256M). This allows the user
to control the size of the memory used by the integrated graphics controller. Automatic
allows the BIOS to choose the optimal size. Available sizes may be limited by the installed
system memory.
● Integrated Video (enable/disable). Allows you to use integrated video and PCI Up Solution
video at the same time (available on some models only).
NOTE:
under Advanced to allow you to select the primary VGA controller video device.
●
Internal speaker (some models) (enable/disable) (does not affect external speakers)
●
NIC PXE Option ROM Download (enable/disable). The BIOS contains an embedded NIC
option ROM to allow the unit to boot through the network to a PXE server. This is typically
used to download a corporate image to a hard drive. The NIC option ROM takes up memory
space below 1MB commonly referred to as DOS Compatibility Hole (DCH) space. This
space is limited. This F10 option will allow users to disable the downloading of this
embedded NIC option ROM thus giving more DCH space for additional PCI cards which may
need option ROM space. The default will be to have the NIC option-ROM-enabled.
● HPET (enable/disable). The HPET (high precision event timer) can be disabled in the event
that it causes a resource conflict in the OS.
in the Computer Setup—File table.)
After Integrated Video is enabled and changes saved, a new menu item appears
Restore from Removable Media on page 9
Save to Removable Media
in the