BT Broadband Module User Manual page 72

Current security triggers are displayed. There is an option to delete each entry.
•
Select "New Trigger"
The following screen is displayed
•
Enter the following parameters
Transport Type
Port Number Start
Port Number End
Secondary Port Number
Start
Secondary Port Number
End
Allow Multiple Hosts
Max Activity Interval
Enable Session Chaining
UDP Session Chaining
Broadband Module/Broadband Module Plus Manual
Adds a trigger for a TCP or UDP application
Sets the start of the trigger port range for the control session
Sets the end of the trigger port range for the control session
Sets the start port range that the trigger will open
Sets the end of the port range that the trigger will open
Allow or Block sets whether or not a secondary session can be
initiated to/from different remote hosts or the same remote
host on an existing trigger
The max interval time in milliseconds between the use of the
secondary port sessions. If a secondary port opened by a
trigger has not been used for the specified time, it is closed
If this is enabled, TCP dynamic sessions also become
triggering sessions, which allows multi-level session triggering
If this is enabled, UDP dynamic sessions also become
triggering sessions, which allows multi-level session triggering
BT Versatility
69