Dhcp - BT Broadband Module User Manual

(3) DHCP

This option uses RFC 1483 Routed. DHCP (Dynamic Host Configuration Protocol) is used to
automatically obtain the IP addresses.
•
Select "DHCP" from the "ADSL Modem: Types of Access" screen
•
Select "Next"
The following screen is displayed
•
Select one of the following modes. Your service provider will advise you on the mode to be
selected
LLC Bridged
LLC Routed
VCMux Bridged
VCMux Routed
"Enable Link State Monitoring" should be ON
•
Select "Next"
Broadband Module/Broadband Module Plus Manual
BT Versatility
23