Quick Setup; Connecting Apc To The Lan; Set Up The Pc To Automatically Obtain An Ip Address - BT Broadband Module User Manual

QUICK SETUP

C PC
ONNECTING A
Power up the PC
Connect the Ethernet port on the
PC to any LAN port (1 - 4) on the MDF
using a Cat 5 cable/patch cord.
Check that the LED on the MDF cover for the
port the PC is connected to, is lit permanently. This
indicates a good Ethernet connection between the
PC and the Broadband Module
S PC
ET UP THE TO AUTOMATICALLY OBTAIN AN
Click Start and Control Panel
Broadband Module/Broadband Module Plus Manual
LAN
TO THE
ADSL
Port 1
Port 2
Port 3
Port 4
IP
ADDRESS
BT Versatility
7