Eth/Dmz Port; Pppoe - BT Broadband Module User Manual

ETH/DMZ P
ORT
By default this port is set up as a DMZ with an IP address of 192.168.0.1 and a subnet mask of
255.255.255.0. The DHCP server is enabled on this and provides addresses in the same subnet
range.
The ETH/DMZ port can also be used to connect to an external broadband modem, a LAN or a
WAN, or to add a host to the DMZ. To do this, follow the following procedure:
•
Select "ETH/DMZ Port"
The following screen is displayed
•
Select the "Change the ETH/DMZ settings here ..."
(To Change the DMZ IP address here ..., see page 31)
Three options are presented

(1) PPPoE

PPPoE is used when connecting to an external broadband modem
•
Select "PPPoE" from the "ETH/DMZ Port: Mode" screen
•
Select "Next"
The following screen is displayed
Broadband Module/Broadband Module Plus Manual
BT Versatility
27