Ip Routes - BT Broadband Module User Manual

Informational
Debug
•
The output can be directed to the Console or the Event Log.
IP R
OUTES
This allows static IP routes to be defined.
Existing routes are listed. To change the parameters on an existing route
•
Select "IP Routes" in Advanced Configuration menu
The following screen is displayed
•
Select "Create new IP V4 route ..."
The following page is displayed
•
Enter the following parameters:
- Destination IP address
- Gateway IP address
- Netmask
- Cost – this sets the number of hops counted as the cost of the route.
- Interface – choose from the following:
ipwan
ipdmz
iplan
None
- Advertise – true or false
•
Select "OK"
The list of routes is displayed again.
Broadband Module/Broadband Module Plus Manual
BT Versatility
73