Additional Endpoint Options - BT Broadband Module User Manual

BT Versatility
Broadband Module/Broadband Module Plus Manual
•
Select Confirm Changes
The following screen is displayed
Restart the module.

Additional Endpoint Options

There are three additional parameters for each IP Endpoint:
Change VoIP Endpoint additional options here ...
Enable Silence Suppression
This applies to IP trunks only, is disabled by default and should not be changed.
Enable RFC2833
On the BROADBAND MODULE this applies only to IP trunks, is disabled by default and should
not be changed.
On the BROADBAND MODULE PLUS it will be automativally enabled by the BBV Service on
registration and should not be changed.
Codecs
On the BROADBAND MODULE, G.711 will be automatically enabled by the BBV Service on
registration and should not be changed.
35