Adsl Test - BT Broadband Module User Manual

BT Versatility
Broadband Module/Broadband Module Plus Manual
Maximum Calls/day
Auto Recovery On
Auto Recovery Timer
•
Enter the new parameters
•
Select "Change" ("Reset" restores the default values)
ADSL T
EST
This performs a series of diagnostic tests on the ADSL connection and displays the test results.
•
Select "Perform ADSL Test"
The tests are performed and the results are displayed.
Result
Passed
Failed
80
regardless of whether data is present or not until the call is
manually disconnected.
If the Initial Period is set to zero, and the Recurring period is set
to a non-zero value, then the call is only monitored for idle
periods during the Recurring Period.
If the Initial Period is set to a non-zero value, and the Recurring
Period is set to zero, then the call is only monitored for idle
periods during the Initial Period. If the call is still connected after
the Initial Period, it will remain connected until manually
disconnected.
A call counter sets a threshold on the maximum number of ISDN
calls allowed per day. When this threshold is exceeded, ISDN is
disabled. This is designed to control the number of calls
inadvertently made by applications without the knowledge of the
user. The range is 0 -1000. When this is set to 0 (the default
setting), there is no limit on the number of calls that can be made.
The counter is automatically set to zero at midnight each day.
When enabled, the auto recovery timer becomes active.
A timer option is provided to automatically re-enable the ISDN
after the retry threshold is reached. The timer range is 1 - 120
minutes. The default setting is 30 minutes.
Test
User diagnostics
complete
Physical connection
Diagnostic
-
WAN port
connecting:
handshaking
Cause
ADSL connection OK
ADSL line
disconnected