BT Broadband Module User Manual page 69

BT Versatility
Broadband Module/Broadband Module Plus Manual
- Source address
Mask is always 255.255.255.255
-
IP Destination address
-
Mask is always 255.255.255.255
-
- Protocol, TCP or UDP
- Source port or range of ports (associated with source IP address)
- Destination port or range of ports (associated with destination IP address)
- Direction, Inbound or Outbound
•
Select "Apply"
•
Save the new configuration
•
Restart the module
Adding Raw IP Filters
Filters based on IP address and protocol only can be added to the security level displayed.
•
Select "Add Raw Filter"
The following screen is displayed
Enter the following parameters
- IP Source address and Subnet Mask
- IP Destination address and Subnet Mask
- IP Protocol
- Direction, Inbound or Outbound
•
Select "Apply"
•
Save the new configuration
•
Restart the module
Host Validators
Traffic to or from specific hosts can be blocked by the firewall.
66