•
Select the address to remove from the drop down menu
•
Select "Next", this takes you back to the "Only allow the wireless PCs I specify to connect
"option
Two options are presented for the WLAN Interface:-
DMZ (this is the default setting where the WLAN normally resides on the DMZ)
-
*Recommended
LAN (see screen warning re security)
-
In order to provide maximum security, PCs connected to the WLAN are not allowed to program
the module via the web interface. If programming from a wireless network PC is required, the
WLAN interface should be changed from DMZ to LAN.
•
Select an option
•
Select "Next"
The following screen is displayed
Broadband Module/Broadband Module Plus Manual
BT Versatility
51