BT Broadband Module User Manual page 78

Existing DHCP Server Subnets
The settings for the existing subnets on the iplan and ipdmz are displayed.
All displayed parameters can be changed – change the setting to a new value and click "Apply".
To delete a subnet, check the associated box and select "Apply".
To create a new subnet
•
Select Create new subnet ...
The screen displayed is the same as Edit DHCP server subnet in the following section.
Advanced Options
•
Select Advanced Options
Parameters for this subnet
The current subnet parameters are shown. These can be changed as required.
IP addresses to be available on this subnet
Broadband Module/Broadband Module Plus Manual
BT Versatility
75