Setting Up Ip Trunks; Setting Up Ip Extensions - BT Broadband Module User Manual

BT Versatility
Broadband Module/Broadband Module Plus Manual
The new settings are displayed,
Restart the module
The ADSL setup is now complete.
S IP T
ETTING UP RUNKS
The following procedure is used to set up the BROADBAND MODULE and the BROADBAND
MODULE PLUS to operate with the BT Broadband Voice service.
A broadband connection must first be established before VoIP can be programmed. Refer to the
VoIP section (page 6) to find out how many IP trunks can be supported on your broadband
connection.
When you subscribe to the BT Broadband Voice service, you will be given a URL to link to and a
username and password. Connect to the URL from any PC on the LAN and enter the username
and password. The VoIP trunks will then be automatically configured.
To verify that the trunks have registered with the BT Broadband Voice service
•
Select "Status" from the main menu, scroll down to VoIP and verify that each trunk has
registered as indicated by
S IP E
ETTING UP XTENSIONS
The BROADBAND MODULE PLUS supports up to twelve IP endpoints which can be configured
as either trunks, extensions, or a combination of both. Note that when Unified Messaging
Service is required, one endpoint must be permanently assigned to it.
V-IP Featurephones must be used as local or remote extensions. (Note that other manufacturers
IP phones will not work with the system). Refer to the V-IP Featurephone Quick Reference User
Guide for setting up and connecting the phone.
Select "VoIP" from the Setup menu
12
.