BT Versatility
Broadband Module/Broadband Module Plus Manual
•
Select "Next", this takes you back to the "Allow all wireless PCs to connect except those I
specify" option
(2) Only allow the wireless PCs I specify to connect *Recommended
Refer to Appendix B to find out the MAC address of a PC
Enter the MAC Addresses in the table provided in Appendix A
•
Select "Next"
The following screen is displayed
•
Select add an address here ...
The following screen is displayed
•
Enter the MAC address of the PCs to be allowed to connect to the wireless network
•
Select "Next"
The following screen is displayed
Add an address here ... takes you back to the previous screen to enter another MAC address
Remove an address here ... takes you to the following screen
50