BT Broadband Module User Manual page 51

BT Versatility
Broadband Module/Broadband Module Plus Manual
•
Enter a 26 character hexadecimal key (hexadecimal characters consist of the characters A –
F, and the numbers 0 – 9)
Make a note of this key as must be entered into every PC that connects to the WLAN
•
Select "Next", this takes you to Address Authentication (page 48)
(4) Wi-Fi Protected Access (WPA) on the wireless network *Recommended
•
Select "Next"
The following screen is displayed
•
Enter a pass phrase of between 8 and 63 characters
Enter the Pass Phrase in the table provided in Appendix A as it is required when setting up
PCs for wireless networking.
•
Select "Next"
The following screen is displayed
Three options are presented for Address Authentication:-
(1) Allow any wireless PCs to connect
•
Select "Next", this takes you to Select Interface (page 51)
(2) Allow all wireless PCs to connect except those I specify
•
Select "Next"
48