BT Broadband Module User Manual page 55

BT Versatility
Broadband Module/Broadband Module Plus Manual
The WLAN parameters are displayed
•
Select "Confirm Changes"
•
Restart the module
Go to Appendix A when setting up PCs for wireless networking
General Settings
These are used to change individual settings after the wireless network has been initially set up.
The links listed below allow you to change individual network settings used in the initial setup as
previously described
Change your wireless channel here ...
Change your wireless network name here ...
Change your wireless security settings here ...
Change which wireless PCs are allowed to connect here ...
Set the interface for the wireless network here ...
Enable / Disable
Enable or disable the wireless network here ...takes you the following screen
Two options are presented:-
52