Advanced Voip Settings; Unified Messaging Settings; Isdn - BT Broadband Module User Manual

BT Versatility
Broadband Module/Broadband Module Plus Manual
On the BROADBAND MODULE PLUS, G.729 will be automatically enabled by the BBV Service
on registration and should not be changed.
For IP extensions, when the V-IP Featurephone is initially installed, the codec will be set by the
BT engineer.

Advanced VoIP Settings

These parameters are pre-configured and should not be changed.

Unified Messaging Settings

These parameters are pre-configured and should not be changed.

ISDN

Where the PBX is equipped with ISDN line(s), ISDN can be used to automatically back up the on-
board ADSL modem in the event of line failure. In the case where no broadband service is
available, ISDN can be used for Internet access. The default setting is that ISDN is disabled.
Obtain the following information from your Internet Service Provider
Phone number to connect to the ISP
Username
Password
•
Select "ISDN" from the Setup menu
The following screen is displayed
•
Select "Change the ISDN settings here ..."
Three options are presented for using ISDN :-
(1) Disabled
With this option, ISDN is never used to establish an Internet connection. This is the default
setting.
(2) Backup
When this option is enabled, ISDN is used to automatically backup the on-board ADSL modem
in the event of line failure. When a line failure is detected, ISDN will wait 60 seconds before
backing up ADSL. When the ADSL line is restored, the ISDN call will be automatically
disconnected and browsing resumed over ADSL.
36