Table of Contents
Advertisement
Connecting to the USB Port
The mini Type B USB port is located on the SW2 DP front panel. It can be used to configure
the switcher via SIS commands as an alternative to the RS-232 connector.
To set up a USB connection:
1.
2.
Connect a USB A to mini B cable between the USB Config port on the switcher front
panel and a USB port on your computer.
Mini Type B
USB
AUTO
INPUTS
SWITCH
1
2
CONFIG
SW2 DP Front Panel
Figure 4.
USB Port Connection
If this is the first time you have connected an SW2 DP to this USB port on your
computer, the Found New Hardware Wizard opens. On the first screen, specify whether
you want the computer to connect to Windows Update in order to search the web for
the driver that it needs to communicate with the switcher via the USB port. This is not
necessary if the USB driver already exists on your computer.
Select the
•
Yes, this time only
connect to Windows Update only this one time.
Select
•
Yes, now and every time I connect a device
to automatically connect to Windows Update to search the web every time the
switcher is connected to this USB port.
Select
•
No, not this time
Update to search the web at this time (for example, if the driver is already on your
computer).
See
figure 5
on the next page.
Type A
USB
USB
Ports
USB Cable
INPUTS OUTPUT
SIGNAL
1
2
HDCP
SW2 DP
DISPLAYPORT SWITCHER
radio button if you want your computer to
if you do not want the computer to connect to Windows
USB 1
Computer
if you want the computer
SW2 DP • Installation
6
Advertisement
Table of Contents
