Connecting To The Usb Port - Extron electronics SW HD 4K Series User Manual

Connecting to the USB Port

The Mini-B USB port is located on the SW HD 4K front panel (see figure 5). Use this port to
configure the switcher via SIS commands.
1.
2.
Connect a USB A to Mini-B cable between the USB Config port on the switcher front
panel and the USB port on a computer.
USB Mini-B
INPUTS
IR
AUTO
1 2 3
SWITCH
CONFIG
SW4 HD 4K Front Panel
Figure 5. USB Port Connection
If this is the first time you have connected an SW HD 4K to this USB port on your
computer, the Found New Hardware Wizard opens. On the first screen, specify
whether you want the computer to connect to Windows Update in order to search the
web for the driver that it needs to communicate with the switcher via the USB port. This
is not necessary if the USB driver already exists on your computer.
Figure 6. Found New Hardware Wizard Opening Screen
Select the
• Yes, this time only
computer to connect to Windows Update only this one time.
USB A
USB
Ports
USB Cable
INPUTS OUTPUT
SIGNAL
4
1 2 3 4
HDCP
SW4 HD 4K
HDMI SWITCHER
1
2
3
4
radio button (see figure 6,
SW HD 4K Series • Installation
USB 1
Computer
) if you want your
1
10