Gpib Interface - ITech IT6722 User Manual

5.4 GPIB interface

First, Connect the GPIB interface on the power supply and the GPIB card on
computer via IEEE488 bus, must be full access and tighten the screws. Then
set the address, the address range of the power : 0 to 30, can set by the
function key on the front panel, press the
system menu function, find the GPIB address setting by
address,
line.
Enter Enter
key to confirm. GPIB address is stored in nonvolatile memory
Copyright © Itech Electronics Co., Ltd.
Remote
I-set I-set
(Shift)+ key to enter the
▼ ▼
button, type the
Operation Mode
47