Trigger Operation; Menu Operation - ITech IT6722 User Manual

number(number1-9).At last press

3.8 Trigger operation

The trigger source of IT6700 include manual and BUS, manual means trigger
by button of the front panel, and BUS means trigger by command from the PC.
You need to select the trigger source (TRIG) from the menu before using this
function.
After you edit a list file, press
signal. During the running process,

3.9 Menu operation

Press
items on the screen, through direction keys and rotary knob to overturn VFD
display, then the screen will display the following functions .Press
button will enter corresponding items. Press
menu.
IT6722/IT6723/IT6723B/IT6723C/IT6723G/IT6723H/IT6724/IT6724B/IT6724C/
IT6724G/IT6724H/IT6726B/IT6726G/IT6726H/IT6726V power supply menu
function is shown as below.
MAX VOLT
Set the max voltage output limit
OCP SET
OFF
ON
SYST SET P-MEM
（RESET）
P-OUT (OFF)
COMM (GPIB)
BEEP (ON)
NOTE
The memory capacity is 9*8, which indicate 8 memory groups and 9 memory in each
group. The memory group you use at the present should be selected in the Menu(MEM
GROUP)., refer to chapter 3.9.
IT6726G/IT6726H has 9×7 groups of memory capacities.
I-set I-set
(Shift) +
Disable the OCP function
Enable the OCP function
Reset
Power on parameter is restored to factory setting
Keep Set the power-on parameter as the last power off state
OFF Set the power-on output state to be Offt
Set the power-on output state to be the last power-off
Keep
output state
GPIB ADDR
BAUD
RS232
NONE 8BIT
MODE
USB
Select USBcommunication interface
OFF
Disable the key sound
Copyright © Itech Electronics Co., Ltd.
Enter
button to confirm.
Enter
(Shift) +
Enter
button will flash all the time.
(Menu) to enter the menu. You will see a optional
ESC
button will return to previous
Address can be set within 0-30
4800
9600
19200
38400
57600
115.2K
NONE 8BIT
EVEN 8BIT
ODD 8BIT
SIGNAL
MUX
Function
and Features
（Trigger）to give a trigger
Enter
Address can be
within 0-30
set
21